SDSHobby
C-47 SKYTRAIN 2.4G EPO FOAM PLANE (GREEN) READY TO FLY RIGHT HAND THROTTLE BRUSHLESS VERSION
| Material | EPO |
| Wingspan | 57.87 inches (1470mm) |
| Overall Length | 38.58 inches (980mm) |
| Flying Weight | 42.32 oz (1200 g) w/Battery |
| Motor Size | Twin 480 size (1100kv) outrunner brushless motors (installed) |
| Radio | 2.4ghz 4+ channel included(RTF version) |
| Servos | 4 x 9g Servos installed |
| Speed Control | Twin Pro 30A Brushless with Switch-Mode BEC |
| Battery | 3S 11.1V 2200 25C |
| N.W.(KGS) | 4.2 |
| G.W.(KGS) | 4.8 |
| CTN SIZE (cm) | 98.5*50*61.5 (the carton size is for 3 pcs/ctn) |
Specifications:, Package contents:, Note:,
(installed) Flight Times Average (6-12 mins) .4g RC 4channel right ...SDSHobby
C-47 SKYTRAIN 2.4G EPO FOAM PLANE (GREEN) READY TO FLY LEFT HAND THROTTLE BRUSHLESS VERSION
| Material | EPO |
| Wingspan | 57.87 inches (1470mm) |
| Overall Length | 38.58 inches (980mm) |
| Flying Weight | 42.32 oz (1200 g) w/Battery |
| Motor Size | Twin 480 size (1100kv) outrunner brushless motors (installed) |
| Radio | 2.4ghz 4+ channel included(RTF version) |
| Servos | 4 x 9g Servos installed |
| Speed Control | Twin Pro 30A Brushless with Switch-Mode BEC |
| Battery | 3S 11.1V 2200 25C |
| N.W.(KGS) | 4.2 |
| G.W.(KGS) | 4.8 |
| CTN SIZE (cm) | 98.5*50*61.5 (the carton size is for 3 pcs/ctn) |
Specifications:, Package contents:, Note:,
(installed) Flight Times Average (6-12 mins) .4g RC 4channel left ...SDSHobby
BIG PLASTIC-STEEL CLIP (5 PIECES )
| Maximum opening distance of the clip | 45mm |
Features:, Note:,
A good helper for the production and maintenance of the ...SDSHobby
F4U CORSAIR EPO ELECTRIC AIRPLANE ALMOST READY TO FLY BRUSHLESS VERSION W/RETRACT LANDING GEAR (W/O REMOTE CONTROL AND BATTERY AND CHARGER)
| Battery | 14.8V 2200Mah 25C Li-Po |
| CTN SIZE (cm) | 111*54*82 (the carton size is for 4 pcs/ctn) |
Specifications:, Wingspan:, 1270mm, Overall Length:, 1066mm, Wing loading:, 50g/dm2, Flying weight:, 1650g, Servo:, 9g*4pcs, ESC:, 40A Brushless, Motor:, MB3720A-KV500 Brushless Outrunner, Material:, EPO, Recommended equipments (need to buy separately):, Note:,
.4G RC 4 channel Charger Because the product is in ...SDSHobby
FUTABA 25T SERVO HORN/ ALUMINUM ALLOY REINFORCED SERVO ARM FOR CAR/ BOAT/ AIRPLANE MODEL
Specifications:, Meet Bars Aperture: M3, :, Compared with the Plastic Servo Horn, this,
L1 ≈ 35mm L2 ≈5mm L3 ≈0mm 5 teeth (include ...SDSHobby
GOPRO THREE-AXLE SHOCK ABSORPTION CAMERA GIMBAL (360 DEGREE) WITHOUT SERVOS
Features:, Camera Gimbal:, 44g, 95g (including 3 servos), Installation Dimension(L*W):, 45*20mm, Kindly Remark:,
Suitable for all kinds of FPV camera and small sports ...SDSHobby
DUAL-AXLE SHOCK ABSORPTION FPV CAMERA GIMBAL WITH THREE SERVOS
Features:, Material:, fiberglass, Net Weight:, 190g (including 3 servos), Kindly Remark:,
Suitable for camera within 105mm width and 60mm height Applicable ...SDSHobby
IMAX B6AC 1-6S MULTIFUNCTIONAL PROFESSIONAL BALANCE CHARGER/DISCHARGER WITH BUILT-IN AC ADAPTOR AND OUTPUT 1A / 5W
| Operating Voltage Range | AC 100-240V; DC 11-18V |
| Charging Current Range | 0.1-5.0A |
| Discharging Current Range | 0.1-1.0A |
| Max. Input/Charging Power | 50W |
| Lithium Battery | 1-6S |
| Ni-Cd/Ni-MH Battery | 1-15S |
| Lead Battery Voltage | 2-20V |
| Dimension | 135 * 144 * 36mm |
| Available Plugs | USA, Euro and Australia |
Introduction:, This item is for a rapid charger/discharger for all kind of battery of RC hobby, with built in balancer for lipo battery. Battery that can be charged by this charger,Lipo / Li-ion / LiFe / NiMh / NiCad / Pb / Lead Acid, Specification:, Ma. Discharging Power: 5W, Features:, Optimized operating software, Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically., Processing time limit:, You can also limit the maximum process time to avoid any possible defect., Accessories Included:,
B6AC features the so-called AUTO function that set the feeding ...SDSHobby
ROBOT GRIPPER FOR BIGHAND ROBOT ARM/ TRANSLATION GRIP/ BIGHAND HOLDER (WITHOUT BROADENING DEVICE)
| The biggest advantage | it grips objects very stable and easy, and also for bulky objects. |
| Material | 60series duralumin with black sand spraying plastics |
| Weight | 28g/pair |
Broadening device for BigHand Holder (ERT-B):, The board is uesd for expanding the gripper distance of BigHand; the distance will be 146mm if you use a couple of broadening device.,
Product Description : Without broadening device, the actual distance of ...SDSHobby
BROADENING DEVICE FOR BIG HAND HOLDER/ HARD ALLOY GRIPPER
| Material | 60series duralumin with black sand spraying plastics |
| Weight | 28g/pair |
SDSHobby
71IN 26% EXTRA330SC 30CC RC GASOLINE AIRPLANE /PETROL AIRPLANE ARF (GASOLINE AND ELECTRIC) - ORANGE/WHITE COLOR
| Wing Span | 71in/ 1800mm |
| Length | 68in/ 1720mm |
| Wing Area | 78sq.dm |
| Flying Weight | 4500-5000g |
| Gas Engine | 30-40cc |
| Radio Control | at least 6 channels |
| Servo | 10-15KG*6pcs |
| Propeller | 18*6, 18*8, 18*10, 19*6, 19*8, 19*10, 20*8 |
| Spinner | 3.5in |
| Receiver Battery | 4.8V-6.2V 1200-2000mAh |
| Twin Switches | one for the receiver, the other for CDI |
Specifications:, Features:, Light weight construction, High performance hardware including: Ball linkate control system; PU wheels; C.F.Tube; Anodized long arms, Carbon Landing gear; Safe servos stapers, Carbon Fiber Accessories:, , Requirements for RTF Equipments (need to buy separately):, ,
Pre-order (Early September), the description and photo are just for ...SDSHobby
JR 23T SERVO HORN/ALUMINUM ALLOY REINFORCED SERVO ARM FOR CAR/ BOAT/ AIRPLANE MODEL
Specifications:, Meet Bars Aperture: M3, :, Compared with the Plastic Servo Horn, this,
L1 ≈ 35mm L2 ≈5mm L3 ≈0mm 3 teeth (include ...SDSHobby
HITEC 24T SERVO HORN/ ALUMINUM ALLOY REINFORCED SERVO ARM FOR CAR/ BOAT/ AIRPLANE MODEL
Specifications:, Meet Bars Aperture: M3, :, Compared with the Plastic Servo Horn, this,
L1 ≈ 35mm L2 ≈5mm L3 ≈0mm 4 teeth (include ...SDSHobby
FUTABA 25T SERVO HORN/ ALUMINUM ALLOY REINFORCED SERVO ARM FOR CAR/ BOAT/ AIRPLANE MODEL
Specifications:, Meet Bars Aperture: M3, :, Compared with the Plastic Servo Horn, this,
L1 ≈ 35mm L2 ≈5mm L3 ≈0mm 5 teeth (include ...